TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Frequency | 720 kHz |
Number of Pins | 10 Pin |
Supply Voltage (DC) | 900mV (min) |
Current Rating | 25.0 mA |
Case/Package | VSON-10 |
Number of Outputs | 1 Output |
Output Voltage | 1.8V ~ 5.5V |
Output Current | 1.5 A |
Number of Positions | 10 Position |
Quiescent Current | 25.0 µA |
Number of Regulated Outputs | 1 Output |
Switching Frequency | 720 kHz |
Topology | Boost |
Input Voltage (Max) | 6.5 V |
Input Voltage (Min) | 0.9 V |
Output Voltage (Max) | 5.5 V |
Output Voltage (Min) | 1.8 V |
Output Current (Max) | 1.2 A |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 0.9 V |
Input Voltage | 0.9V ~ 6.5V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Size-Length | 3 mm |
Size-Width | 3 mm |
Size-Height | 0.9 mm |
Operating Temperature | -40℃ ~ 85℃ |
The TPS6102x family of devices provide a power supply solution for products powered by either a one-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 200 mA while using a single-cell alkaline battery, and discharge it down to 0.9 V. The device can also be used for generating 5 V at 500 mA from a 3.3-V rail or a Li-Ion battery. The boost converter is based on a fixed-frequency, pulse width modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters the power save mode to maintain a high efficiency over a wide-load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum peak current in the boost switch is limited to a value of 800 mA, 1500 mA, or 1800 mA depending on the version of the device.
●The TPS6102x devices keep the output voltage regulated even when the input voltage exceeds the nominal output voltage. The output voltage can be programmed by an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low-EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode. The device is packaged in a 10-pin VSON PowerPAD package measuring 3 mm x 3 mm (DRC).
TI
Adjustable 1.5A Switch 96% Efficient Boost Converter with Down-Mode QFN-10
TI
Step-Up Regulator Adjustable, 1.5A Switch, 96% Efficient Boost Converter with Down-Mode, QFN-10 Conv DC-DC 0.9V to 6.5V Step Up Single-Out 1.8V to 5.5V 1.2A 10Pin VSON EP T/R
TI
TPS61020 DC to DC Converter and Switching Regulator Chip 1.8VDC to 5.5VDC Output Evaluation Board
TI
Conv DC-DC 0.9V to 6.5V Step Up Single-Out 1.8V to 5.5V 1.2A 10Pin VSON EP T/R
TI
Conv DC-DC 0.9V to 6.5V Step Up Single-Out 1.8V to 5.5V 1.2A 10Pin VSON EP
TI
96% EFFICIENT SYNCHRONOUS BOOST CONVERTER
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.