TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Frequency | 850 kHz |
Number of Pins | 10 Pin |
Supply Voltage (DC) | 2.70V (min) |
Current Rating | 12.0 mA |
Case/Package | VSSOP-10 |
Number of Outputs | 1 Output |
Input Voltage (DC) | 10.0 V |
Output Voltage | 3.3 V |
Output Current | 800 mA |
Number of Positions | 10 Position |
Quiescent Current | 12.0 µA |
Number of Regulated Outputs | 1 Output |
Output Power | 555 mW |
Switching Frequency | 850 kHz |
Topology | Buck |
Input Voltage (Max) | 10 V |
Input Voltage (Min) | 2.7 V |
Output Voltage (Min) | 3.3 V |
Output Current (Max) | 0.8 A |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Accuracy | 3 % |
Supply Voltage | 2.7 V |
Supply Voltage (Max) | 10 V |
Supply Voltage (Min) | 2.7 V |
Input Voltage | 2.7V ~ 10V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Cut Tape (CT) |
Size-Length | 3 mm |
Size-Width | 3 mm |
Size-Height | 1.02 mm |
Operating Temperature | -40℃ ~ 85℃ |
The TPS62056DGS is a synchronous Step-down DC-to-DC Converter ideally suited for systems powered from a 1- or 2-cell Li-ion battery or from a 3- to 5-cell NiCd, NiMH or alkaline battery. It is a synchronous pulse width modulation (PWM) converter with integrated N- and P-channel power MOSFET switch. Synchronous rectification increases efficiency and reduces external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving pulse frequency modulation (PFM) mode at light load currents. Operating frequency is typically 850kHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 600kHz to 1.2MHz. For low noise operation, the converter can be programmed into forced-fixed frequency in PWM mode. In shutdown mode, the current consumption is reduced to less than 2µA.
● High-efficiency synchronous step-down converter with up to 95% efficiency
● High-efficiency over a wide load current range in power-save mode
● 100% Maximum duty cycle for lowest dropout
● Low-noise operation in forced fixed-frequency PWM operation mode
● Internal soft-start
● Overtemperature and overcurrent protected
● Green product and no Sb/Br
TI
3.3V Output 800mA 10V Vin 95% Efficient Step-Down Converter in MSOP-10
TI
3.3V Output, 800mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10 10-VSSOP -40℃ to 85℃
TI
3.3V Output, 800mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10 10-VSSOP -40℃ to 85℃
TI
3.3V Output, 800mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10 10-VSSOP -40℃ to 85℃
TI
3.3V Output, 800mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10 10-VSSOP -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.