TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 7 Pin |
Case/Package | VQFN-7 |
Number of Outputs | 1 Output |
Output Voltage | 0.8V ~ 6V |
Output Current | 3 A |
Quiescent Current | 17.0 µA |
Number of Regulated Outputs | 1 Output |
Switching Frequency | 2.4 MHz |
Topology | Buck |
Input Voltage (Max) | 6 V |
Input Voltage (Min) | 2.5 V |
Output Voltage (Max) | 6 V |
Output Voltage (Min) | 0.8 V |
Output Current (Max) | 3 A |
Operating Temperature (Max) | 125 ℃ |
Operating Temperature (Min) | -40 ℃ |
Input Voltage | 6 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Operating Temperature | -40℃ ~ 125℃ (TJ) |
The TPS62085, TPS62086, and TPS62087 devices are high-frequency synchronous step-down converters optimized for small solution size and high efficiency. With an input voltage range of 2.5 V to 6.0 V, common battery technologies are supported. The devices focus on high-efficiency step-down conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range.
●To address the requirements of system power rails, the internal compensation circuit allows a large selection of external output capacitor values ranging from 10 µF to 150 µF. Together with its DCS-Control architecture, excellent load transient performance and output voltage regulation accuracy are achieved. The devices are available in a 2-mm × 2-mm QFN package.
TI
3A Step-Down Converter with DCS-Control and Hiccup Short Circuit Protection in 2x2 QFN Packagew
TI
Conv DC-DC 2.5V to 6V Step Down Single-Out 0.8V to 6V 3A 7Pin VQFN T/R
TI
Conv DC-DC 2.5V to 6V Step Down Single-Out 0.8V to 6V 3A 7Pin VQFN T/R
TI
TPS62085 DC to DC Converter and Switching Regulator Chip 1.18VDC to 1.22VDC Output Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.