The TPS6215x family is an easy-to-use synchronous step down dc-dc converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy by the use of DCS-Control topology.
●With their wide operating input-voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either Li-Ion or other batteries as well as from 12-V intermediate power rails. The devices support up to 1-A continuous output current at output voltages between 0.9 V and 6 V (in 100% duty-cycle mode). The soft-start pin controls the output-voltage start-up ramp, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and open-drain power-good (PG) pins.
●In power-save mode, the devices draw quiescent current of about 17 µA from VIN. Power-save-mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device turns off and current consumption is less than 2 µA.
●The device, available in adjustable- and fixed-output-voltage versions, comes in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
● DCS-Control™ Topology
● Input Voltage Range: 3 V to 17 V
● Up to 1-A Output Current
● Adjustable Output Voltage From 0.9 V to 6 V
● Pin-Selectable Output Voltage (nominal, + 5%)
● Programmable Soft Start and Tracking
● Seamless Power-Save Mode Transition
● Quiescent Current of 17 µA (typ.)
● Selectable Operating Frequency
● Power-Good Output
● 100% Duty-Cycle Mode
● Short-Circuit Protection
● Overtemperature Protection
● Pin to Pin Compatible with TPS62130 and TPS62140
● Available in a 3-mm × 3-mm, VQFN-16 Package