● Qualified for Automotive Applications
● 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on
●B Port (VCCA≤ VCCB)
● VCC Isolation Feature If Either VCC Input Is at
●GND, All Outputs Are in the High-Impedance
●State
● OE Input Circuit Referenced to VCCA
● Ioff Supports Partial-Power-Down Mode
●Operation
● ESD Protection Exceeds AEC-Q100
● A Port
● 2000-V Human-Body Model
● 1500-V Charged-Device Model
● B Port
● ±10-kV Human-Body Model
● 1500-V Charged-Device Model
●## DESCRIPTION/ORDERING INFORMATION
●This 6-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
●When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
●The TXB0106 is designed so that the OE input circuit is supplied by VCCA.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
●To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
