The UCC25600D is a 8-pin High Performance Resonant Mode Controller designed for DC-to-DC applications using resonant topologies, especially the LLC half-bridge resonant converter. The internal oscillator supports the switching frequencies from 40 to 350kHz. This high-accuracy oscillator realizes the minimum switching frequency limiting with 4% tolerance, allowing the designer to avoid over-design of the power stage and, thus, further reducing overall system cost. The programmable dead time enables zero-voltage switching with minimum magnetizing current. This maximizes system efficiency across a variety of applications. The programmable soft-start timer maximizes design flexibility demanded by the varied requirements of end equipment using a half-bridge topology. By incorporating a 0.4A source and 0.8A sink driving capability, a low cost, reliable gate driver transformer is a real option.
● Variable switching frequency control
● Programmable minimum switching frequency with 4% accuracy (3% accuracy, -20 to 105°C temperature)
● Programmable maximum switching frequency
● Programmable dead time for best efficiency
● Programmable soft-start time
● Easy ON and OFF control
● Over-current protection
● Over-temperature protection
● Bias voltage UVLO and overvoltage protection
● Integrated gate driver with 0.4A source and 0.8A sink capability
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.