Part Datasheet Search > Development Kits > FTDI Chip > FT4232HQ Datasheet PDF > FT4232HQ Datasheet Pages 1/55
FT4232HQ
Price from AiPCBA
FT4232HQDatasheet PDF
Page:
of 55 Go
If the format of the manual is confusing, please download and read the original PDF file.
Copyright © Future Technology Devices International Limited 1
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet
Version 2.4
Document No.: FT_000060 Clearance No.: FTDI#78
Future Technology
Devices International Ltd
FT4232H Quad High Speed
USB to Multipurpose
UART/MPSSE IC
The FT4232H is FTDI’s 5
th
generation of USB devices.
The FT4232H is a USB 2.0 High Speed (480Mb/s) to
UART/MPSSE ICs. The device features 4 UARTs. Two
of these have an option to independently configure
an MPSSE engine. This allows the FT4232H to
operate as two UART/Bit-Bang ports plus two MPSSE
engines used to emulate JTAG, SPI, I
2
C, Bit-bang or
other synchronous serial modes. The FT4232H has
the following advanced features:
Single chip USB to quad serial ports with a
variety of configurations.
Entire USB protocol handled on the chip. No USB
specific firmware programming required.
USB 2.0 High Speed (480Mbits/Second) and Full
Speed (12Mbits/Second) compatible.
Two Multi-Protocol Synchronous Serial Engine
(MPSSE) on channel A and channel B, to simplify
synchronous serial protocol (USB to JTAG, I
2
C,
SPI or bit-bang) design.
Independent Baud rate generators.
RS232/RS422/RS485 UART Transfer Data Rate
up to 12Mbaud. (RS232 Data Rate limited by
external level shifter).
FTDI’s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the requirement
for USB driver development in most cases.
Optional traffic TX/RX indicators can be added
with LEDs and an external 74HC595 shift
register.
Adjustable receive buffer timeout.
Support for USB suspend and resume conditions
via PWREN#, SUSPEND# and RI# pins.
Highly integrated design includes +1.8V LDO
regulator for VCORE, integrated POR function
and on chip clock multiplier PLL (12MHz
480MHz).
FTDI FT232B style, asynchronous serial UART
interface option with full hardware handshaking
and modem interface signals.
Fully assisted hardware or X-On / X-Off software
handshaking.
UART Interface supports 7/8 bit data, 1/2 stop
bits, and Odd/Even/Mark/Space/No Parity.
Auto-transmit enable control for RS485 serial
applications using TXDEN pin.
Operational configuration mode and USB
Description strings configurable in external
EEPROM over the USB interface.
Low operating and USB suspend current.
Configurable I/O drive strength (4, 8, 12 or
16mA) and slew rate.
Supports bus powered, self-powered and high-
power bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets
in High Speed mode).
Dedicated Windows DLLs available for USB to
JTAG, USB to SPI, and USB to I
2
C applications.
+1.8V (chip core) and +3.3V I/O interfacing
(+5V Tolerant).
Extended -40°C to 85°C industrial operating
temperature range.
Compact 64-LD Lead Free LQFP or QFN package
Available in compact Pb-free 56 Pin VQFN
packages (RoHS compliant)
+3.3V single supply operating voltage range.
ESD protection for FT4232H IO’s:
Human Body Model (HBM) ±2kV,
Machine Mode (MM) ±200V,
Charge Device Model (CDM) ±500V,
Latch-up free.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in
any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied
on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices
International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights
are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of
the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject
to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document.
Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom.
Scotland Registered Number: SC136640

FT4232HQ Documents

FTDI Chip
55 Pages / 1.61 MByte
FTDI Chip
45 Pages / 1.05 MByte

FT4232 Documents

FTDI Chip
FT4232HL-REEL, USB Controller, 4Channel, 480Mbit/s, USB 2.0, 64Pin LQFP
FTDI Chip
FT4232HQ-REEL, USB Controller, 4Channel, 480Mbit/s, USB 2.0, 64Pin QFN
FTDI Chip
USB Hi-Speed to Quad Channel Serial UART/JTAG/SPI/I2C IC - LQFP-64
FTDI Chip
FTDI FT4232H-56Q-REEL Interface Bridges, USB to UART, MPSSE, 1.62V, 1.98V, QFN, 64Pins, -40℃
FTDI Chip
USB Hi-Speed FT4232H Evaluation Module, USB High Speed to UART/JTAG/SPI/I2C
FTDI Chip
FT4232HL-TRAY, USB Controller, 4Channel, 480Mbit/s, USB 2.0, 64Pin LQFP
FTDI Chip
FT4232HQ-TRAY, USB Controller, 4Channel, 480Mbit/s, USB 2.0, 64Pin QFN
FTDI Chip
USB Hi-Speed to Quad Channel Serial UART/JTAG/SPI/I2C IC - QFN-64
FTDI Chip
IC MINI MODULE USB/FIFO 56QFN
FTDI Chip
USB to UART Bridge Controller UART/USB Interface 56Pin VQFN EP Tray
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.