| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 5.50V (max) |
| Operating Voltage | 2.5V ~ 5.5V |
| Case/Package | TSSOP-20 |
| Number of Outputs | 1 Output |
| Supply Current | 140 µA |
| Number of Channels | 1 Channel |
| Number of Positions | 20 Position |
| Number of Bits | 8 Bit |
| Power Dissipation | 1.25 mW |
| Sample Rate | 167 ksps |
| Resolution (Bits) | 8.0 Bit |
| Operating Temperature (Max) | 105 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 1.25 mW |
| Number of DACs | 1 DAC |
| Supply Voltage | 2.5V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 2.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 6.5 mm |
| Size-Width | 4.4 mm |
| Size-Height | 1.05 mm |
| Operating Temperature | -40℃ ~ 105℃ |
The AD5330BRUZ is a single 8- bit Digital-to-analog Converter (DAC) operates from a 2.5 to 5.5V supply consuming just 115µA at 3V and feature a power-down mode that further reduces the current to 80nA. The device incorporates an on-chip output buffer that can drive the output to both supply rails, but the AD5330 allows a choice of buffered reference input. The AD5330 has a parallel interface. CS selects the device and data is loaded into the input registers on the rising edge of WR. The GAIN pin allows the output range to be set at 0V to VREF or 0V to 2 x VREF. Input data to the DAC is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. An asynchronous CLR input is also provided, which resets the contents of the input register and the DAC register to all zeros. This device also incorporates a power-on reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.
● Guaranteed monotonic by design over all codes
● Power-ON reset to 0V
● Low power parallel data interface
● On-chip rail-to-rail output buffer amplifiers
ADI
129 Pages / 3.27 MByte
ADI
+2.5V to 5.5V, 115A Single Rail-to-Rail Voltage Output 8Bit DAC with Parallel Interface in 20-lead TSSOP
ADI
ANALOG DEVICES AD5330BRUZ Digital to Analog Converter, 8Bit, 167KSPS, Parallel, 2.5V to 5.5V, TSSOP, 20Pins
ADI
IC,D/A CONVERTER,SINGLE,8Bit,CMOS,SSOP,20Pin
ADI
IC,D/A CONVERTER,SINGLE,8Bit,CMOS,SSOP,20Pin
ADI
2.5V to 5.5V, 115uA, Parallel Interface Single Voltage-Output 8-/10-/12Bit DACs
ADI
DAC 1CH Resistor-String 8Bit 20Pin TSSOP T/R
ADI
DAC 1CH Resistor-String 8Bit 20Pin TSSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
