| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Operating Voltage | 5V ~ 18V |
| Case/Package | TO-99-8 |
| Supply Current | 600 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 500 mW |
| Common Mode Rejection Ratio | 90 dB |
| Input Capacitance | 800 fF |
| Bandwidth | 1 MHz |
| Slew Rate | 3.00 V/μs |
| Gain Bandwidth Product | 1 MHz |
| Input Impedance | 999 TΩ |
| Input Offset Voltage | 0.5 mV |
| Input Bias Current | 0.04 pA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Gain Bandwidth | 1 MHz |
| Power Dissipation (Max) | 500 mW |
| Minimum CMRR Range | 90 dB |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Length | 9.4 mm |
| Size-Width | 9.4 mm |
| Size-Height | 4.7 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The AD549LHZ is an Ultralow Input Bias Current Operational Amplifier with very low input bias current. Input offset voltage and input offset voltage drift are laser trimmed for precision performance. The ultralow input current of the part is achieved with Topgate™ JFET technology. This technology allows fabrication of extremely low input current JFETs compatible with a standard junction isolated bipolar process. The 10¹⁵R common-mode impedance which results from the bootstrapped input stage ensures that the input current is essentially independent of the common mode voltage. It is suited for applications requiring very low input current and low input offset voltage. It excels as a preamp for a wide variety of current output transducers, such as photodiodes, photomultiplier tubes or oxygen sensors. The AD549 can also be used as a precision integrator or low droop sample-and-hold and is pin compatible with standard FET and electrometer operational amplifiers.
● Ultralow input bias current
● Input bias current guaranteed over the common-mode voltage range
● Low offset voltage
● Low offset drift
● Low power
● Low input voltage noise
●ESD sensitive device, take proper precaution while handling the device.
ADI
ANALOG DEVICES AD549JHZ Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
ADI
ANALOG DEVICES AD549LHZ Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
ADI
ANALOG DEVICES AD549KHZ Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
ADI
ANALOG DEVICES AD549JH Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
ADI
Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
ADI
ANALOG DEVICES AD549KH Operational Amplifier, Single, 1 Amplifier, 1MHz, 3V/µs, ± 5V to ± 18V, TO-99, 8Pins
ADI
OP Amp Single GP ±18V 8Pin TO-99
ADI
IC OP-AMP, 2000uV OFFSET-MAX, 1MHz BAND WIDTH, MBCY8, METAL CAN, TO-99, 8Pin, Operational Amplifier
ADI
Ultralow Input Bias Current Operational Amplifier
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
