The ADC1001 is a CMOS, 10-bit successive approximation A/D converter. The 20-pin ADC1001 is pin compatible with the ADC0801 8-bit A/D family. The 10-bit data word is read in two 8-bit bytes, formatted left justified and high byte first. The six least significant bits of the second byte are set to zero, as is proper for a 16-bit word.
●Differential inputs provide low frequency input common mode rejection and allow offsetting the analog range of the converter. In addition, the reference input can be adjusted enabling the conversion of reduced analog ranges with 10-bit resolution.
●## Key Specifications
●Resolution
●|
●10 bits
●---|---
●Linearity error
●|
●±1 LSB
●Conversion time
●|
●200µS
● ADC1001 is pin compatible with ADC0801 series 8-bit A/D converters
● Compatible with NSC800 and 8080 µP derivatives-no interfacing logic needed
● Easily interfaced to 6800 µP derivatives
● Differential analog voltage inputs
● Logic inputs and outputs meet both MOS and TTL voltage level specifications
● Works with 2.5V (LM336) voltage reference
● On-chip clock generator
● 0V to 5V analog input voltage range with single 5V supply
● Operates ratiometrically or with 5 VDC, 2.5 VDC, or analog span adjusted voltage reference
● 0.3" standard width 20-pin DIP package
●_TRI-STATE® is a registered trademark of National Semiconductor Corp._
