Product Details
●The ADIS16362 _i_Sensor® is a complete inertial system that includes a triaxis gyroscope and triaxis accelerometer. Each sensor in the ADIS16362 combines industry-leading _i_MEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyro bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements over a temperature range of −20°C to +70°C.
●The ADIS16362 provides a simple, cost-effective method for integrating accurate, multiaxis, inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. An improved SPI interface and register structure provide faster data collection and configuration control. The ADIS16362 uses a compatible pinout and the same package as the ADIS1635x family. Therefore, systems that currently use the ADIS1635x family can upgrade their performance with minor firmware adjustments in their processor designs.
●This compact module is approximately 23 mm × 23 mm × 23 mm and provides a flexible connector interface that enables multiple mounting orientation options.
●Applications
● Medical instrumentation
● Robotics
● Platform control
● Navigation
●### Features and Benefits
● Triaxis digital gyroscope with digital range scaling
●±75°/sec, ±150°/sec, ±300°/sec settings
●Tight orthogonal alignment: <0.05°
● Triaxis digital accelerometer: ±1.7 _g_
● Wide sensor bandwidth: 330 Hz
● Autonomous operation and data collection
●No external configuration commands required
●Start-up time: 180 ms
●Sleep mode recovery time: 4 ms
● Factory-calibrated sensitivity, bias, and axial alignment
●Calibration temperature range: −20°C to +70°C
● SPI-compatible serial interface
● Embedded temperature sensor
● Programmable operation and control - See data sheet
● Single-supply operation: 4.75 V to 5.25 V
● 2000 _g _shock survivability
● Operating temperature range: −40°C to +105°C
