The ADS1013-Q1, ADS1014-Q1, and ADS1015-Q1 devices (ADS101x-Q1) are precision, low-power, 12-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in a VSSOP-10 package. The ADS101x-Q1 devices incorporate a low-drift voltage reference and an oscillator. The ADS1014-Q1 and ADS1015-Q1 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS101x-Q1 well suited for power- and space-constrained, sensor measurement applications.
●The ADS101x-Q1 perform conversions at data rates up to 3300 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1015-Q1 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1014-Q1 and ADS1015-Q1 for under- and overvoltage detection.
●The ADS101x-Q1 operate in either continuous-conversion mode or single-shot mode. The devices are automatically powered down after one conversion in single-shot mode; therefore, power consumption is significantly reduced during idle periods.
● Qualified for Automotive Applications
● AEC-Q100 Qualified With the Following Results:
● Temperature Grade 1: –40°C to +125°C
● HBM ESD Classification 2
● CDM ESD Classification C4B
● 12-Bit Noise-Free Resolution
● Wide Supply Range: 2.0 V to 5.5 V
● Low Current Consumption: 150 µA (Continuous-Conversion Mode)
● Programmable Data Rate: 128 SPS to 3.3 kSPS
● Single-Cycle Settling
● Internal Low-Drift Voltage Reference
● Internal Oscillator
● I2C Interface: Four Pin-Selectable Addresses
● Four Single-Ended or Two Differential Inputs (ADS1015-Q1)
● Programmable Comparator (ADS1014-Q1 and ADS1015-Q1)
