| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 14 Pin |
| Case/Package | HTSSOP-14 |
| Output Current | ≤400 mA |
| Supply Current | 5 mA |
| Number of Circuits | 2 Circuit |
| Number of Positions | 14 Position |
| Common Mode Rejection Ratio | 45 dB |
| Input Offset Drift | 9.00 µV/K |
| Bandwidth | 600 kHz |
| Slew Rate | 170 mV/μs |
| Gain Bandwidth Product | 0.6 MHz |
| Input Offset Voltage | 1 mV |
| Input Bias Current | 0.0015μA @5V |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Minimum CMRR Range | 45 dB |
| Supply Voltage | 4.5V ~ 16V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 150℃ |
The ALM2402QPWPRQ1 is a dual high voltage/ high current output Operational Amplifier with protection features that is optimal for driving low impedances or high ESR capacitive loads. It operates with single or split power supplies from 5.0 to 16V and can output up to 400mA DC. Each op-amp includes over-temperature flag/shut-down. It also includes separate supply pins for each output stage that allow the user to apply a lower voltage on the output to limit the Voh and henceforth the on-chip power dissipation.
● Op-amp with discrete power boost buffer replacement
● Wide supply range for both supplies (up to 16V)
● Over temperature shutdown
● Current limit
● Shutdown pin for low Iq applications
● Stable with large capacitive loads (up to 3µF)
● Zero crossover distortion
● Internal RF/EMI filter
● 1mV Typical low offset voltage
● 400mA/channel Continuous high output current drive
TI
TEXAS INSTRUMENTS ALM2402QPWPRQ1 Operational Amplifier, 4 Amplifier, 600kHz, 0.17V/µs, 4.5V to 16V, HTSSOP, 14Pins
TI
OP Amp Dual High Current R-R O/P 16V 12Pin SON T/R
TI
ALM2402-Q1 OP Amp Evaluation Board
TI
Dual Opamp with High Current Output 12-SON -40℃ to 125℃p
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
