ATV212H075M3X Datasheet PDF - Schneider Electric

The ATV212H075M3X is a variable speed AC Drive with heat sink. This drive is for 3-phase 0.75kW asynchronous motors. It is specifically intended for the most commonly encountered fluid management applications. Due to its eco-energy based design, energy savings of up to 70% can be achieved compared to a traditional control system. This commercialized drive comes with an adjustable PI regulator. The electrical isolation is between power and control.

● RTU Transmission frame

● IEC 61800-5-1 Pollution degree

● 12kHz Switching frequency

● ±15% Torque accuracy

● 1 LED - red - DC bus energized local signalling

● By DC injection Braking to standstill

● 4230VDC Between control and power terminals dielectric strength

● 2830VDC Between earth and power terminals dielectric strength

● >=1MR at 500VDC for 1 minute Insulation resistance

● 2-wire RS485 Physical interface

● 51dB conforming to 86/188/EEC Noise level