DC1568A Datasheet PDF - Linear Technology

DC1568A demonstration board is a 2A monolithic multichemistry battery charger for solar power applications featuring the LT3652EDD. The LT3652 is a complete mid-power Li ion battery charger that can operate over a wide input voltage range. The charger employs a 3.3V float voltage feedback reference that allows the battery float voltage to be adjusted up to 14.4V. The LT3652 has an input voltage regulation loop which reduces charge current if the input falls below a programmed level, set with a resistor divider. The circuit provides CC/CV charging with a 2A maximum charge current that is programmed by a sense resistor. A precondition feature trickle charges a low voltage battery, and bad battery detection provides a signal if the battery does not respond to preconditioning. DC1568A programs the output voltage to be 8.2V, and the 5.7V precondition threshold is internally set as a fraction of the programmed output voltage.

● Input supply voltage regulation loop for peak power tracking in (MPPT) solar applications

● User selectable termination: C/10 or On board termination timer

● Programmable charge rate up to 2A

● 5% charge current accuracy

● 2.5% C/10 detection accuracy

● Binary coded open collector status pins