Part Datasheet Search > Interface ICs > FTDI Chip > FT232HQ-REEL Datasheet PDF > FT232HQ-REEL Datasheet Pages 1/65
FT232HQ-REEL Datasheet - FTDI Chip
| Manufacturer: | FTDI Chip |
| Category: | Interface ICs |
| Case Package: | QFN-48 |
| Description: | FTDI Chip FT232HQ-REEL Universal Asynchronous Receiver & Transmitter RS232, RS422, RS485 UART 12Mbit/s, 1.8V, 3.3V |
| Pictures: |
FT232HQ-REELDatasheet PDF
Page:
of 65 Go
If the format of the manual is confusing, please download and read the original PDF file.
Copyright © 2014 Future Technology Devices International Limited 1
Document No.: FT_000288
FT232H SINGLE CHANNEL HI-SPEED USB TO MULTIPURPOSE UART/FIFO IC
Datasheet Version 1.81
Clearance No.: FTDI #199
Future Technology
Devices International Ltd
FT232H Single Channel Hi-
Speed USB to Multipurpose
UART/FIFO IC
The FT232H is a single channel USB 2.0 Hi-
Speed (480Mb/s) to UART/FIFO IC. It has the
capability of being configured in a variety of
industry standard serial or parallel interfaces.
The FT232H has the following advanced
features:
Single channel USB to serial / parallel ports
with a variety of configurations.
Entire USB protocol handled on the chip. No
USB specific firmware programming required.
USB 2.0 Hi-Speed (480Mbits/Second) and Full
Speed (12Mbits/Second) compatible.
Multi-Protocol Synchronous Serial Engine
(MPSSE) to simplify synchronous serial protocol
(USB to JTAG, I
2
C, SPI (MASTER) or bit-bang)
design.
UART transfer data rate up to 12Mbaud.
(RS232 Data Rate limited by external level
shifter).
USB to asynchronous 245 FIFO mode for
transfer data rate up to 8 Mbyte/Sec.
USB to synchronous 245 parallel FIFO mode for
transfers upto 40 Mbytes/Sec
Supports a proprietary half duplex FT1248
interface with a configurable width, bi-
directional data bus (1, 2, 4 or 8 bits wide).
CPU-style FIFO interface mode simplifies CPU
interface design.
Fast serial interface option.
FTDI’s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the
requirement for USB driver development in
most cases.
Adjustable receive buffer timeout.
Option for transmit and receive LED drive
signals.
Bit-bang Mode interface option with RD# and
WR# strobes
Highly integrated design includes 5V to
3.3/+1.8V LDO regulator for VCORE, integrated
POR function
Asynchronous serial UART interface option with
full hardware handshaking and modem
interface signals.
Fully assisted hardware or X-On / X-Off
software handshaking.
UART Interface supports 7/8 bit data, 1/2 stop
bits, and Odd/Even/Mark/Space/No Parity.
Auto transmit enable control for RS485 serial
applications using the TXDEN pin.
Operational mode configuration and USB
Description strings configurable in external
EEPROM over the USB interface.
Configurable I/O drives strength (4, 8, 12 or
16mA) and slew rate.
Low operating and USB suspend current.
Supports self powered, bus powered and high-
power bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets
in Hi-Speed mode).
+1.8V (chip core) and +3.3V I/O interfacing
(+5V Tolerant).
Extended -40°C to 85°C industrial operating
temperature range.
Compact 48-pin Lead Free LQFP or QFN
package
Configurable ACBUS I/O pins.
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.