Part Datasheet Search > Logic ICs > TI > TXS0102DCUTG4 Datasheet PDF > TXS0102DCUTG4 User Reference Manual Guide Pages 1/36
TXS0102DCUTG4 User Reference Manual Guide - TI
Manufacturer: | TI |
Category: | Logic ICs |
Case Package: | VSSOP-8 |
Description: | 2Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Application 8-VSSOP -40℃ to 85℃ |
Pictures: |
TXS0102DCUTG4Datasheet PDF
Page:
of 36 Go
If the format of the manual is confusing, please download and read the original PDF file.
1
®
AN1435.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
User’s Guide: TXS25-4 Evaluation Kit
Complete Amplifier Evaluation System
• TXS25-4: 4-Channel Digital Amplifier
• Single Power Supply (+25V) Operation
• Internally Generated Negative Rail High-voltage Supply
(-25V)
• Internally Generated and Regulated Low-voltage Supplies
(+5V/+3.3V/1.8V)
• D2Audio Canvas II™ Installation CD-ROM (includes USB
Driver and D2Audio Canvas II User’s Guide)
• Detachable Digital/Analog Audio/Control I/O and Power
Assembly Boards
• “SCAMP III” Header Pins on Digital/Analog Audio/Control
I/O Board Enables In-system Firmware Upgradeability
• Optical (TOSLINK) and Coax Digital S/PDIF Inputs that
Accept an IEC60958 Compliant Interconnect Carrying
Linear PCM with an Fs of 32kHz~192kHz
• Optical (TOSLINK) Digital S/PDIF Output
• 4 Channels of Analog Audio Inputs Using
High-Performance 4-Channel Analog-to-Digital Converter
(ADC)
•2 I
2
S/Left-Justified Digital Audio Input Headers
•2 I
2
S/Left-Justified Digital Audio Output Headers
• Rotary Knob Connected to GPIO Lines Enables Simple
Master Volume Control for Channels 1 and 2
• Subwoofer Analog Audio Output (Passive Filtered PWM
Line Level Output)
• High-Quality Speaker Banana-Jack Connectors
D2Audio Canvas II™GUI Simplifies System Design
• Intuitive, “Point-and-click” Audio-Centric User Interface
Simplifies Evaluation of All Audio Processing
Configurations
• Configuration for Stereo, Dual Zone, Stereo Bi-Amp or
Powered 2.1 Systems Takes Less than a Minute
Selectable DSP Processing Functions
• Input Selection (Analog, S/PDIF, I
2
S/Left-Justified)
• 4 Independent Channels of Audio Processing
- Tone Control
- Matrix Mixing
- Programmable Crossover with Butterworth,
Linkwitz/Riley, Bessel Filter Types
- 5-Band and 3-Band Parametric EQ
- Master Volume Control
- Loudness Contour
- Individual Channel Time Delay
- Per Channel Dynamic Range Compression/Limiting
- Independent Channel Level Controls - Enables
Independent Level Control for Amplified Channels 1, 2,
3 and 4 Outputs as well as Digital Audio Outputs
D2Audio SoundSuite™ Immersive Processing
• Mono2Stereo™
• WideSound™
• DeepBass™
• AudioAlign™
The TXS25-4 Evaluation Kit is a complete amplifier
evaluation system for the TXS25-4 digital amplifier module.
Audio system designers can quickly evaluate all of the
features and functions of the TXS25-4 design with this
system.
This system offers the ultimate in configurations,
digital/analog I/O and power supply connection. It offers
headers for all digital audio inputs and outputs so that the
system designer can quickly and easily “wire-wrap” into the
board. This enables any I
2
S/Left-Justified digital audio
source to be delivered from any digital audio source such as
an HDMI™ receiver or a Media Networking Processor and
input into the TXS25-4 amplifier with minimum effort. A
header is also offered for the control communication bus
(2-wire interface), which enables fast connection of a system
microcontroller for rapid prototyping.
The D2Audio Canvas GUI software simplifies system design
with an intuitive, audio-centric user interface with
“point-and-click” options on a Windows™ PC. Organized
processing blocks are included for audio input selection,
Tone Control, Crossovers, Parametric Equalizers, Adjustable
Time Delay, Signal Limiter/Compressor, Volume Control,
Loudness Contour, and Independent Level Control.
Application Note February 25, 2009
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.