EPM570GM100C5N Datasheet PDF - Altera

● Low-cost, low-power CPLD

● Instant-on, non Volatile architecture

● Standby current as low as 25 μA

● Provides fast propagation delay and clock-to-output times

● Provides four global clocks with two clocks available per logic array block (LAB)

● UFM block up to 8 Kbits for non Volatile storage

● MultiVolt core enabling external supply voltages to the device of either 3.3 V/2.5 V or 1.8 V

● MultiVolt I/O interface supporting 3.3 V, 2.5 V, 1.8 V, and 1.5 V logic levels

● Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors

● Schmitt triggers enabling noise tolerant inputs (programmable per pin)

● I/Os are fully compliant with the Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 2.2 for 3.3 V operation at 66 MHz

● Supports hot-socketing

● Built-in Joint Test Action Group (JTAG) boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990

● ISP circuitry compliant with IEEE Std. 1532

● 440 Typical Equivalent Macrocells