LMR12010YMKDEMO/NOPB Datasheet PDF - TI

The LMR12010YMKDEMO/NOPB is an demo board for LMR12010 is a step down DC to DC regulator that operates at 3MHz switching frequency. The demo board is configured to convert 5V input to 1.8V output at 1A load current using the Y version. The tiny low profile thin SOT23 package allows the design to use less than one square inch of board area. The circuit is configured with the boost diode connected to VIN. VIN must not exceed the maximum operating limit of 5.5V + VfD2 using this configuration. This will ensure that the voltage between the boost and SW pins, VBOOST to VSW, does not exceed 5.5V for proper operation.

● 3V to 20V input operating range

● 0.8V to 18V output voltage range

● Output current up to 1A

● Low shutdown Iq, 30nA typical

● Internal soft start

● Internally compensated

● Current mode PWM operation

● 3MHz switching Frequency

● Extremely easy to use

● Tiny overall solution reduces system cost