The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with &plusmm;15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND).
●The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
● ESD Protection for RS-232 Bus Pins
● ±15 kV (HBM)
● ±8 kV (IEC61000-4-2, Contact Discharge)
● ±15 kV (IEC61000-4-2, Air-Gap Discharge)
● Meets or Exceeds the Requirements of TIA/EIA-
●232-F and ITU V.28 Standards
● Operates With 3-V to 5.5-V VCC Supply
● Operates up to 250 kbit/s
● Two Drivers and Two Receivers
● Low Supply Current: 300 µA (Typical)
● External Capacitors: 4 × 0.1 µF
● Accepts 5-V Logic Input With 3.3-V Supply
● Pin Compatible to Alternative High-Speed Devices
●(1 Mbit/s)
● SN65C3232E (40°C to +85°C)
● SN75C3232E (0°C to 70°C)
