The MSP430FG4618IPZ is a 16-bit ultra-low-power Mixed-signal Microcontroller features a powerful 16-bit RISC MSP430 CPU, 16-bit registers and constant generators that contribute to maximum code efficiency. The architecture combined with five low-power modes, is optimized to achieve extended battery life. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs. The device configurations with two 16-bit timers, 12-bit A/D converter, dual 12-bit DACs, one universal serial communication interface (USCI), one universal synchronous/asynchronous communication interface (USART), liquid crystal display driver, a comparator, a hardware multiplier and 80 general-purpose I/O pins. This device operates at a maximum frequency of 8MHz.
● 16-bit RISC architecture, 125ns instruction cycle time
● 3-channel internal DMA
● 12-bit ADC with internal reference, sample-and-hold and autoscan feature
● Three configurable operational amplifiers
● Dual 12-bit DAC with synchronization
● 16-bit Timer_A with 3 Capture/Compare registers
● 16-bit Timer_B with 7 Capture/Compare with shadow registers
● On-chip comparator
● Supply voltage supervisor and monitor with programmable level detection
● Serial communication interface (USART1), select asynchronous UART or Synchronous SPI by software
● Enhanced UART supports automatic baud-rate detection
● IrDA Encoder and decoder
● Synchronous SPI
● Serial on-board programming
● Programmable code protection by security fuse
● Brownout detector
● Basic timer with real-time clock (RTC) feature
● Integrated LCD driver up to 160 segments with regulated charge pump
● 400µA at 1MHz, 2.2V Active mode (AM) power consumption
