SN74AHCT541 Datasheet PDF - TI

The ’AHCT541 octal buffers/drivers are ideal for driving bus lines or buffer memory address registers. These devices feature inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.

●The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. The outputs provide non-inverted data when they are not in the high-impedance state.

●To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

● Inputs Are TTL-Voltage Compatible

● Latch-Up Performance Exceeds 250 mA Per JESD 17

● ESD Protection Exceeds JESD 22

● 2000-V Human-Body Model (A114-A)

● 200-V Machine Model (A115-A)

● 1000-V Charged-Device Model (C101)