| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 125 MHz |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 4.75V ~ 5.25V |
| Case/Package | SOIC-16 |
| Number of Outputs | 1 Output |
| Output Current | 8 mA |
| Number of Positions | 16 Position |
| Clock Speed | 45 MHz |
| Number of Bits | 2 Bit |
| Propagation Delay Max (tpd) | 20.0 ns |
| Voltage Nodes | 5.00 V |
| Output Current Drive | -50.0 µA |
| Number of Inputs | 2 Input |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 4.75V ~ 5.25V |
| Supply Voltage (Max) | 5.25 V |
| Supply Voltage (Min) | 4.75 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 10 mm |
| Size-Width | 4 mm |
| Size-Height | 1.5 mm |
| Operating Temperature | 0℃ ~ 70℃ |
Texas Instruments brings you their latest SN74LS112AD flip flop device, a simple yet effective method for storing your circuit"s state information. It has a differential output signal. This flip flop has a minimum operating temperature of 0 °C and a maximum of 70 °C. This device comes in tube packaging. This inverting/non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.75 V, while its maximum is 5.25 V. It has 2 channels per chip.
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin PDIP Tube Flip Flop JK-Type Neg-Edge 2Element 16Pin PDIP Tube
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC Tube
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC T/R
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOP T/R
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC T/R
Motorola
Dual JK negative edge-triggered flip-flop
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOP Tube
TI
IC JK TYPE NEG TRG DUAL 16DIP
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin PDIP
TI
IC JK TYPE NEG TRG DUAL 16SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
