| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 100 MHz |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 4.75V ~ 5.25V |
| Case/Package | DIP-20 |
| Number of Outputs | 8 Output |
| Output Current | 20 mA |
| Number of Circuits | 8 Circuit |
| Number of Positions | 20 Position |
| Clock Speed | 100 MHz |
| Number of Bits | 8 Bit |
| Propagation Delay Max (tpd) | 17.0 ns |
| Polarity | Non-Inverting |
| Voltage Nodes | 5.00 V |
| Output Current Drive | -325 µA |
| Number of Inputs | 8 Input |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 4.75V ~ 5.25V |
| Supply Voltage (Max) | 5.25 V |
| Supply Voltage (Min) | 4.75 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 26.92 mm |
| Size-Width | 6.6 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | 0℃ ~ 70℃ (TA) |
Store state information for later use by using the Texas Instruments SN74S374N flip flop device. It has a single-ended output signal. With a 3-state output, this is power management at its best. This flip flop has a minimum operating temperature of 0 °C and a maximum of 70 °C. This device comes in tube packaging. It has 8 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.75 V, while its maximum is 5.25 V.
TI
Octal D-Type Positive Edge Triggered Flip-Flops with 3-State Outputs
TI
TEXAS INSTRUMENTS SN74S374N Flip-Flop, Tri State Non Inverted, Positive Edge, 74S374, D, 8ns, 100MHz, 20mA, DIP
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin SOIC Tube
TI
IC D-TYPE POS TRG SNGL 20SOIC
TI
IC D-TYPE POS TRG SNGL 20SOIC
TI
IC D-TYPE POS TRG SNGL 20SOIC
TI
IC D-TYPE POS TRG SNGL 20SOIC
TI
IC D-TYPE POS TRG SNGL 20SO
TI
IC D-TYPE POS TRG SNGL 20SO
TI
IC D-TYPE POS TRG SNGL 20DIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
