| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 4 Pin |
| Case/Package | XFBGA-4 |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 5.50 V |
| Output Current | 2 A |
| Number of Channels | 1 Channel |
| Number of Positions | 4 Position |
| Quiescent Current | 2.00 µA |
| Output Current (Max) | 2 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 1.4 V |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 0.92 mm |
| Size-Width | 0.918 mm |
| Size-Height | 0.3 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The TPS22913BYZVT is a small low rON Load Switch with controlled turn-on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 to 5.5V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals. The TPS22913B/C device provides reverse current protection in ON and OFF states. An internal reverse voltage comparator disables the power-switch when the output voltage (VOUT) is driven higher than the input voltage (VIN), by VRCP, to quickly (10µs typical) stop the flow of current towards the input side of the switch. Reverse current protection is always active, even when the power-switch is disabled. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low. The TPS22913B/C contains a 150R on-chip load resistor for quick output discharge when the switch is turned off.
● 2A Maximum continuous switch current
● Low threshold control input
● Controlled slew-rate
● Under-voltage lock out
● Full-time reverse current protection
● Quick output discharge transistor (TPS22913B/C Devices)
TI
5.5V, 2A, 61m Load Switch With Quick Output Discharge and Reverse Current Protection 4-DSBGA -40℃ to 85℃
TI
5.5V, 2A, 61m Load Switch With Quick Output Discharge and Reverse Current Protection 4-DSBGA -40℃ to 85℃
TI
5.5V, 2A, 61m Load Switch With Quick Output Discharge and Reverse Current Protection 4-DSBGA -40℃ to 85℃
TI
5.5V, 2A, 61m Load Switch with Quick Output Discharge and everse Current Protection 4-DSBGA -40℃ to 85℃
TI
5.5V, 2A, 61m Load Switch with Quick Output Discharge and everse Current Protection 4-DSBGA -40℃ to 85℃
TI
TPS22913B Ultra-Small, Low Ron, 2A Single-Channel Load Switch Evaluation Module
TI
TPS22913C Ultra-Small, Low Ron, 2A Single-Channel Load Switch Evaluation Module
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
