| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 278 kHz |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 0.00V (min) |
| Case/Package | HTSSOP-20 |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 57.0 V |
| Output Voltage | ≤15.7 V |
| Output Current | 1.00 A |
| Supply Current | 920 µA |
| Number of Channels | 1 Channel |
| Number of Positions | 20 Position |
| Duty Cycle | 80 % |
| Input Voltage (Max) | 57 V |
| Input Voltage (Min) | 0 V |
| Input Power (Max) | 30 W |
| Input Power (Max) | 30 W |
| Maximum Duty Cycle | 78 % |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 30 W |
| Supply Voltage | 0V ~ 57V |
| Input Voltage | 57 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 6.6 mm |
| Size-Width | 4.5 mm |
| Size-Height | 1.05 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The TPS23754PWP is a high-power/high-efficiency PoE Interface and DC to DC Controller support a number of input voltage ORing options including highest voltage, external adapter preference and PoE preference. These features allow the designer to determine which power source will carry the load under all conditions. The PoE interface features the new extended hardware classification necessary for compatibility with high-power midspan power sourcing equipment (PSE) per IEEE 802.3at. The detection signature pin can also be used to force power from the PoE source off. Classification can be programmed to any of the defined types with a single resistor. The DC-DC controller features two complementary gate drivers with programmable dead time. This simplifies the design of active-clamp forward converters or optimized gate drive for highly-efficient flyback topologies. The second gate driver may be disabled if desired for single MOSFET topologies.
● Supports high-efficiency topologies
● Adapter ORing support
● Programmable frequency with synchronization
● Green product and no Sb/Br
●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
The TPS23754/6 is a combined Power over Ethernet (PoE) powered device (PD) interface and current-mode DC-DC controller optimized specifically for isolated converters
TI
Power Over Ethernet PSE Controller 0V 57V 30W 20Pin HTSSOP EP
TI
TEXAS INSTRUMENTS TPS23754PWP Power Over Ethernet (POE) Controller, 57V, 278kHz Switch/Clock, 4.5V UVLO Threshold, HTSSOP-20
TI
Power Over Ethernet PSE Controller 0V 57V 30W 20Pin HTSSOP EP
TI
Power Over Ethernet PSE Controller 0V 57V 30W 20Pin HTSSOP EP
TI
33-57V Vin, 12V Vout High Power Evaluation Module for TPS23754
TI
20-57V Vin, 5V Vout High Power Evaluation Module for TPS23754
TI
The TPS23754/6 is a combined Power over Ethernet (PoE) powered device (PD) interface and current-mode DC-DC controller optimized specifically for isolated converters
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
