TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 16 Pin |
Supply Voltage (DC) | 3.00V (min) |
Case/Package | QFN-16 |
Number of Outputs | 1 Output |
Output Voltage | 3V ~ 20V |
Output Current | 0 A |
Number of Channels | 1 Channel |
Number of Positions | 16 Position |
Output Current (Max) | 5.5 A |
Output Current (Min) | 0 A |
Operating Temperature (Max) | 125 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 3V ~ 20V |
Supply Voltage (Max) | 20 V |
Supply Voltage (Min) | 3 V |
Input Voltage | 3V ~ 20V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Size-Length | 4.1 mm |
Size-Width | 4.1 mm |
Size-Height | 0.95 mm |
Operating Temperature | -40℃ ~ 125℃ |
The TPS2590RSAT is a high current Load Switch with dual fault threshold and selectable fault response. It provides highly integrated hot-swap power management and superior protection in applications where the load is powered by busses up to 20V. The maximum UV turn-on threshold of 2.9V makes the TPS2590 device well suited to standard bus voltages as low as 3.3V. This device is intended for systems where a voltage bus must be protected to prevent load shorts from interrupting or damaging other system components. It has multiple programmable protection features. Load protection is accomplished by a non-current-limiting fault threshold, a hard current-limit threshold and a fault timer. The dual current thresholds allow the system to draw high current for short periods without causing a voltage droop at the load.
● Integrated pass MOSFET
● Programmable fault timer
● Programmable fault current
● Programmable hard current-limit
● Fast disable
● Thermal shutdown
● Load fault alert
● Latching and auto-retry operation
● Green product and no Sb/Br
●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
20V, 5.5A, 30mΩ eFuse with Dual Fault Threshold and Selectable Fault Response
TI
20V, 5.5A, 30mΩ eFuse with Dual Fault Threshold and Selectable Fault Response 16-QFN -40℃ to 125℃
TI
20V, 5.5A, 30mΩ eFuse with Dual Fault Threshold and Selectable Fault Response 16-QFN -40℃ to 125℃
TI
TEXAS INSTRUMENTS TPS2590EVM Evaluation Module, Hot Swap Controller, Controlled Inrush Current, Led Status Display
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.