Description
●The TPS62065-Q1 and TPS62067-Q1 device is a highly-efficient synchronous step-down DC-DC converter. The device provides up to 2-A output current.
●With an input voltage range of 2.9 V to 6 V the device is a perfect fit for power conversion from a 5-V or 3.3-V system supply rail. The TPS62065-Q1 and TPS62067-Q1 device operates at 3-MHz fixed frequency and enters power-save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output-voltage ripple. For low noise applications, the TPS62065-Q1 device can be forced into fixed frequency PWM mode by pulling the MODE pin high. The TPS62067-Q1 provides an open drain power good output. In the shutdown mode, the current consumption is reduced to 5 µA and an internal circuit discharges the output capacitor. The TPS62065-Q1 and TPS62067-Q1 device is optimized for operation with a tiny 1-µH inductor and a small 10-µF output capacitor to achieve smallest solution size and high regulation performance.
●Features
●• Qualified for Automotive Applications
●• AEC-Q100 Qualified With the Following Results:
● – Device Temperature Grade 1: –40°C to 125°C Operating Junction Temperature Range
● – Device HBM ESD Classification Level 2
● – Device CDM ESD Classification Level C4B
●• 3-MHz Switching Frequency
●• VIN Range from 2.9 V to 6 V
●• Up to 97% Efficiency
●• Power Save Mode and 3-MHz Fixed PWM Mode
●• Power Good Output
●• Output Voltage Accuracy in PWM Mode ±1.5%
●• Output Capacitor Discharge Function
●• Typical 18-µA Quiescent Current
●• 100% Duty Cycle for Lowest Dropout
●• Voltage Positioning
●• Clock Dithering
●• Supports Maximum 1-mm Height Solutions
●• Available in a 2 × 2 × 0,75-mm WSON
●Applications
●• Point Of Load Regulator
●• Automotive POL
●• Automotive Camera Modules
●• Car Infotainment and Navigation Systems
●• ADAS Applications
