The TRS3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal-to-terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from one
●3-V to 5.5-V supply. The devices operate at data-signaling rates up to 250 kbps and a maximum of 30-V/µs driver-output slew rate.
● RS-232 Bus-Terminal ESD Protection Exceeds
●±15 kV Using Human-Body Model (HBM)
● Meets or Exceeds the Requirements of
●TIA/EIA-232-F and ITU V.28 Standards
● Operates With 3-V to 5.5-V VCC Supply
● Operates up to 250 kbps
● Two Drivers and Two Receivers
● Low Supply Current: 300-µA Typical
● External Capacitors: 4 × 0.1 µF
● Accepts 5-V Logic Input With 3.3-V Supply
● Alternative High-Speed Terminal-Compatible
●Devices (1 Mbps)
● SN65C3232 (–40°C to 85°C)
● SN75C3232 (0°C to 70°C)
