| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 10 Pin |
| Supply Voltage (DC) | 3.00V ~ 4.30V |
| Case/Package | UQFN-10 |
| Number of Outputs | 4 Output |
| Supply Current | 1 µA |
| Number of Channels | 2 Channel |
| Number of Positions | 10 Position |
| Bandwidth | 900 MHz |
| Number of Inputs | 2 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| 3dB Bandwidth | 900 MHz |
| Supply Voltage | 3V ~ 4.3V |
| Supply Voltage (Max) | 4.3 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 1.85 mm |
| Size-Width | 1.45 mm |
| Size-Height | 0.5 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The TS3USB30ERSWR is a high-bandwidth 1:2 Analog Switch specially designed for the switching of high-speed USB 2.0 signals in handset with limited USB I/Os. The wide bandwidth (900MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from an USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation and is compatible with various standards, such as high-speed USB 2.0 (480Mbps). The TS3USB30E integrates ESD protection cells on all pins.
● IOFF Supports partial power-down-mode operation
● Low power consumption
● Latch-up performance exceeds 100 mA per JESD 78, class II
● ESD performance I/O port to GND
● Green product and no Sb/Br
●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable
TI
TEXAS INSTRUMENTS TS3USB30ERSWR Analog Switch, 2Channels, 10Ω, 3V to 4.3V, QFN, 10Pins
TI
USB Interface, High Speed 1:2 Mux/Demux, USB 2.0, 3V, 4.3V, UQFN, 10Pins
TI
Analog Multiplexer / Demultiplexer, 1:2, 2Circuits, 10Ω, 1µA, 3V to 4.3V, VSSOP-10
TI
TEXAS INSTRUMENTS TS3USB3000RSER USB Interface, Switch, USB 2.0, 2.7V, 4.3V, UQFN, 10Pins
TI
DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.1GHz) Switch 10-UQFN -40℃ to 85℃
TI
USB and Mobility Display Port Switch Dual 4.3V 0.06A 12Pin WQFN T/R
TI
: Dual USB 2.0 High-Speed and Mobile High-Definition Link Switch Evaluation Module
TI
High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single
TI
DP3T USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.5GHz) Switch
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
