The TX810EVM is an evaluation module for TX810 eight channel, current programmable, low noise, transmit/receive switch. The internal diodes limit the output voltage when high voltage transmitter signals are applied to the input. While the insertion loss of TX810 is minimized during receive mode. Unlike conventional T/R switches, the TX810 contains a 3bit interface used to program bias current from 7mA to 0mA for different performance and power requirements. When the TX810 bias current is set as 0mA (i.e., high impedance mode), the device is configured as power down mode. In the high impedance mode, TX810 does not add additional load to high voltage transmitters. In addition, the device can wake up from power down mode in less than 1µs. With these advanced programmability features, significant power saving can be achieved in systems.
● Eight inputs and eight outputs available
● Configurable bias current to match output voltage to system"s needs
● Flexible input and output loads to match customer"s circuit
● Fast wake up time
● Featured with dual supply operation
● Optimised insertion loss
●It is important to operate this EVM within the input voltage range of -90V to 90V and the output voltage range of -2V to 2V. Exceeding the specified input range may cause damage to the EVM
