OP37 Pinout Diagram

●The OP37GSZ is a Low Noise Precision High Speed Operational Amplifier optimized for circuits with gains greater than five. This design change increases slew rate to 17V/ms and gain-bandwidth product to 63MHz. It provides the low offset and drift of the OP07 plus higher speed and lower noise. Offsets down to 25µV and a maximum drift of 0.6µV/°C make it ideal for precision instrumentation applications. The low input bias current of 10nA and offset current of 7nA are achieved by using a bias-current cancellation circuit. The output stage has good load driving capability. A guaranteed swing of 10V into 600W and low output distortion make the OP37 an excellent choice for professional audio applications. These characteristics, coupled with long-term drift of 0.2mV/month, allow the circuit designer to achieve performance levels previously attained only by discrete designs. High-volume production of the OP37 is achieved by using on-chip zener-zap trimming.

● Low noise (80nVp-p (0.1 to 10Hz), 3nV/√Hz at 1kHz)

● Low drift (0.2µV/°C)

● High speed

● Low input offset voltage (10µV)

● Excellent CMRR (126dB)

● High open-loop gain (1.8 million)

● Available in die form

●ESD sensitive device, take proper precaution while handling the device.