The KSZ8852HLE-EVAL is an Evaluation Board provides a platform in which to test or explore the functionally of the KSZ8852HLE Ethernet switch. The KSZ8852HLE is an integrated 3-port 10BASE-T/100BASE-TX/FX managed Ethernet switch with two 10/100 PHY ports and generic parallel interface connectivity to a host processor on port 3. The KSZ8852HLE includes all the functions of a 10/100BASE-T/TX/FX switch system that combines switch engine, frame buffers management, addresses look-up table, queue management, MIB counters, media access controllers (MAC) and PHY transceiver interfaces. It is fully compliant with the IEEE 802.3 standards (10BASE-T and 100BASE-TX).
● Two Ethernet LAN interfaces with RJ-45 jacks and isolation magnetics (Ports 1 & 2)
● Auto MDI/MDI-X for automatic detection and correction for straight-through and crossover cables
● Generic 8/16-bit parallel Host processor interface (Port 3)
● Provisioning for line side and chip side over-voltage protection (optional)
● On-board 3.3V and 1.8/2.5V regulators
● Configurable for VDDIO of 3.3, 2.5 or 1.8V operation
● Serial interface for EEPROM
● LED indicators for link status and activity of the RJ-45 ports
● 25MHz Crystal
● Jumpers for power up configuration of the device
● Jumpers for GPIO pins and I/O voltage selection
● Board operates from a single 5V DC supply
● Reset switch
● Various test points
