| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 5.50V (max) |
| Case/Package | SOIC-8 |
| Number of Outputs | 2 Output |
| Input Voltage (DC) | 5.50 V |
| Output Voltage | 6.30 V |
| Output Current | ≤500 mA |
| Number of Positions | 8 Position |
| Drain to Source Resistance (on) (Rds) | 135 mΩ |
| Polarity | N-Channel |
| Power Dissipation | 725 mW |
| Continuous Drain Current (Ids) | 500 mA |
| Rise Time | 3000 µs |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 2.7 V |
| Output Current (Max) | 500 mA |
| Fall Time | 4400 µs |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Power Dissipation (Max) | 725 mW |
| Supply Voltage | 2.7V ~ 5.5V |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Recommended for New Designs |
| Packaging | Tube |
| Size-Length | 4.9 mm |
| Size-Width | 3.91 mm |
| Size-Height | 1.58 mm |
| Operating Temperature | 0℃ ~ 125℃ (TJ) |
The TPS2042AD is a Power Distribution Switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. This device incorporates 80mR N-channel MOSFET high-side power switches for power-distribution systems. Each switch is controlled by an independent logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V. When the output load exceeds the current-limit threshold or a short is present, these devices limit the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low.
● 500mA Per Channel Continuous current
● Independent thermal and short-circuit protection with overcurrent logic output
● CMOS- and TTL-compatible enable inputs
● 2.5ms Typical rise time
● Undervoltage lockout
● Bidirectional switch
● 10µA Maximum standby supply current
TI
0.7A, 2.7-5.5V Dual (1In/2Out) Hi-Side MOSFET, Fault Report, Act-Low Enable
TI
USB Power Switch Dual 5.5V 0.75A to 1.25A 8Pin SOIC T/R
TI
USB Power SW USB Power Switch Dual 5.5V 0.75A to 1.25A 8Pin HVSSOP EP T/R
TI
USB Power Switch Dual 5.5V 0.75A to 1.25A 8Pin SOIC Tube
TI
USB Power SW USB Power Switch Dual 5.5V 0.75A to 1.25A 8Pin HVSSOP EP Tube
TI
0.7A, 2.7-5.5V Dual (1In/2Out) Hi-Side MOSFET, Fault Report, Act-Low Enable 8-SOIC -40℃ to 85℃
TI
0.7A, 2.7-5.5V Dual (1In/2Out) Hi-Side MOSFET, Fault eport, Act-Low Enable 8-SOIC -40℃ to 85℃
TI
USB Power SW USB Power Switch Dual 5.5V 0.75A to 1.25A 8Pin VSON EP T/R
TI
Automotive 2.7V to 5.5V, 500mA Current-Limited Dual Channel Power Distribution Switch 8-SOIC -40℃ to 125℃
TI
USB Power SW USB Power Switch Dual 5.5V 0.75A to 1.25A 8Pin VSON EP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
